Raised beds from 2007
Did you know that seeds sales are up by 30% this year? Yep, lots of people are starting to grow their own food again. With all the food scares in the past few years and the price of fruits and veggies going up, it’s really the only way to have some control over your food and food costs. There’s nothing as delicious as homegrown vegetables. Freshly picked lettuce for a salad or a warmed by the sun pesticide free tomato, nothing beats that!
Why make a raised bed? Raised beds warm up faster so you can plant earlier and they stay warmer longer so you can extend your season a bit. They also drain better which is great if you’ve got not so good soil like me. They produce better than traditional vegetable beds. They’re also easier to maintain than a traditional bed and the soil doesn’t get compacted because you don’t walk on it.
You can make a raised bed out of concrete blocks, brick, stone or wood. Mine are made of wood so that what I’m going to show you how to make. It’s really easy!
How to Make a Raised Bed
What you need:
Wood planks, a drill, measuring tape, saw, galvanized screws (like deck screws) so they don’t rust, Optional – galvanized L brackets or small piece of wood for the corners (corner blocks).
L Bracket or
What Kind of Wood Should I Use? - I use pine. It holds up for me about 6-7 years. If you are in a very wet climate like the Pacific NW you may want to use cedar. There’s a huge controversy about using pressure treated wood. Before it was a strict no no. Now supposedly they are treating the wood with something that isn’t suppose to be harmful and leach into your beds like previous pressure treated. Do your research and see what other gardeners are using in your area or stick with pine (the cheapest) or cedar (rot resistant).
What Size Are They? – They can be any size that works for you. If you’re going to do Square Foot Gardening (SquareFootGardening.com) he recommends a basic 4 x 4 ft. bed. But you can make them whatever size you want. I just remade some of my beds because they didn’t work for me. I’m 5’4″ and it was always hard to reach into the center of the bed. So I took some of mine apart and built narrower beds. They were originally 4 feet wide which is average. They are now 2 1/2 wide. You can also make them as tall as you need. You can stack two on top of each other if you’re gardening on concrete or really really bad dirt.
Old bed size on the left new on the right
Step One – Cut your planks of wood to what ever size you decided to make your beds.
Step Two -Measure the depth of the wood you’re using and then if you’re using corner blocks like me, transfer that measurement to your corner block wood and cut 4 corner blocks for each bed.
Step Three – pre-drill your the holes for the screws – believe me it makes it much easier if you take the time to do this step! 3 pilot holes is enough.
Step Four – screw the corners together using the corner blocks on the inside corners until all four pieces are joined.
I made the paths in between my new beds just big enough for my little garden seat that I got for my birthday. This way I can sit and weed and I don’t have to kneel or bend over!
Give raised beds a try!
Please check out the other posts in my Gardening 101 Series